Gear Testing & Range Data

Point Blank Archery is run by a USA Archery Level 3 coach who tunes and measures bows at Archery Sarasota — a studio with a range and Labradar Doppler radar. When Coach Rob measures a piece of gear, the data gets published — speeds, weights, grouping, and what actually wears out. This page explains the measurement method. Individual reports will appear here as each one is completed; none are published yet, and Point Blank never posts a number it did not measure.

Why measured gear data matters

Most archery advice online is a rewrite of a manufacturer’s spec sheet. Because the coach behind Point Blank has a range and a Labradar, Point Blank can do something different: measure gear and show the data. Original, measured results help you decide what to buy, because the numbers come from real measurement rather than a catalog rewrite.

Testing method

A measurement is only worth publishing if you can trust it. So every test report will carry the same protocol:

A documented protocol
Every report states the equipment used (for example the chronograph or grain scale), the distance, the conditions, the date, and which USA Archery–credentialed coach ran the test.
Real sample sizes
Each report states how many shots or samples a result is based on, and no result is generalized from a single arrow or a single session.
The actual numbers, in a table
Results are published as a plain, readable data table — the real measurements, not just a conclusion — so you can check the work yourself.
Honest limits
Each report says what the test does and does not prove. Where a result is preliminary or narrow, the limits are stated plainly.
No fabrication, ever
If Point Blank did not measure it, Point Blank does not claim it. A made-up number is worse than no number, so a report is published only after the test is actually done.

Test reports

No test reports have been published yet. When the first test cycle is complete, the reports — with their full method and the real numbers in a table — will be listed here.