Choosing arrow components
Match inserts, points, nocks, and collars to the exact shaft family and arrow build.
The short answer
Choose inserts and nocks by the exact shaft family and stated diameter, because similar appearance does not confirm fit.
Shaft family fit
Start with the exact shaft family and diameter listed by its maker. Match the insert or nock to that specification instead of choosing by appearance.
Grain weight and balance
Point weight contributes to the finished arrow’s total mass and balance. Check the maker’s chart before changing it.
Nock throat cracks
Match replacement nocks to the shaft system and inspect them before shooting. Easton’s arrow safety guidance says not to use damaged arrows.
Insert seating and alignment
Seat inserts and allow the adhesive process to finish exactly as the shaft, insert, and adhesive makers specify.
What the listings actually show
This gear shares the Arrows department listing with Choosing arrows and shafts; the department page shows the live count.
Before you buy
If fit or adhesive instructions are unclear, confirm them with the shaft or component maker before shooting.
Arrow Components Choosing arrows and shafts Choosing fletching tools and materials
How do I check insert and nock fit?
Match the component to the exact shaft family and its stated inside or outside diameter. Similar appearance is not a fit specification.
When should I stop using an arrow?
Stop if the shaft or nock is cracked, split, or otherwise damaged. Easton’s safety guidance says to inspect arrows and not use damaged ones.
How should I seat an insert?
Follow the shaft, insert, and adhesive instructions for alignment and curing before shooting.